IBM ThinkPad G40 Series Service And Troubleshooting Manual page 40

Solving computer problems
5. Change the items you wish to change. To change the value of an item, use
the F5 or F6 key. If the item has a submenu, you can display it by pressing
Enter.
6. Press F3 or Esc to exit from the submenu.
If you are in a nested submenu, press Esc repeatedly until you reach the
IBM BIOS Setup Utility menu.
Note: If you need to restore the settings to their original state as of the
7. Select Restart; then press Enter. Move the cursor to the option you want
for restarting your computer; then press Enter. Your computer restarts.
30
®
ThinkPad G40 Series Service and Troubleshooting Guide
time of purchase, press the F9 key to load the default settings. You
can also select an option in the Restart submenu to load the default
settings or discard the changes.