Cleaning Secondary Filter - Kenmore 116.23156C Use & Care Manual

WARNING
Always unplug power cord from
electrical outlet before performing any
service on vacuum cleaner.
1. Remove the
dust bin.

CLEANING SECONDARY FILTER

Secondary
Filter
2. Remove the
secondary
filter and rinse
with water.
3. Once the filter is washed clean,
squeeze by hand and allow to air dry.
4. Allow filter to dry 24 hours before
putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filter.
DO NOT operate without filter installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
5. Reinstall secondary filter.
6. Reinstall dust bin.
16