Hdmi ® Information Display; Displaying Tv Status Information - Toshiba 32L2400U User Manual

1 From the Options menu, highlight Input Options, and then
press the ENTER button.
2 Highlight HDMI 1(or 2 ) RGB Range and then press the
ENTER button.
3 Press the ▲/▼(arrow) buttons to select Auto, Full, or
Limited, and then press the ENTER button.
Mode
Auto(default)
Full
Limited
The HDMI
devices. If your HDMI
features, the TV may not work properly when this feature is enabled.
HDMI Information Display
®
Viewing the HDMI
1 From the Options menu, highlight HDMI Information
Display, and then press the ENTER button.
2 Press the ▲/▼(arrow) buttons to select On or Off, and then
press the ENTER button.
3 When the HDMI Information is set to On, pressing the INFO
button displays the HDMI Information banner (Resolution,
Scan Type, Frame Rate, Aspect, Bit Depth, Color Space, RGB/
YUV, Chroma Format). When the HDMI Information is set to
Off, the normal banner is displayed.

Displaying TV status information

To display TV status information using the RECALL button:
Press the RECALL button on the remote control.
v
The following information will be displayed (if applicable):
Current input (ANT/CABLE, Video, etc.)
v
Description
Adjusts RGB full range signal automatically.
RGB input signal is displayed in the range from 0 to 255.
RGB input signal is displayed in the range from 16 to 235.
setting (RGB Range) needs proper HDMI
®
source device does not support these
®
signal information:
®
v The signal information banner will appear when this feature is set
to On and you watch an HDMI
button. The signal information will disappear after approximately
60 seconds.
v If you press the INFO button when this feature is set to Off, only
the normal banner will appear.
Setting up your TV
Displaying TV status information
input and press the INFO
®
91
source
TM