Toshiba 32L2400U User Manual page 21

1 ANT/CABLE—Antenna input that supports analog (NTSC)
and digital (ATSC) off-air antenna signals and analog and
digital cable TV (QAM) signals.
2 ColorStream
and shared composite video input, see
rayTM / DVD player, satellite receiver with ColorStreamTM or
/ DVD player, satellite receiver with ColorStream
VCR" on page 26
3 HDMI IN—High-Definition Multimedia Interface input
®
receives digital audio and uncompressed digital video from an
HDMI device or uncompressed digital video from a DVI
®
device. HDMI
signals.
4 Digital Audio out— Optical audio output in Dolby
PCM (pulse-code modulation) format for connecting an
external Dolby
system with optical audio input.
5 Power Cord— Plug one end of the power cord into the jack on
the back of the unit, and the other end into a live electrical
outlet.(Only for 40/50L2400U models)
The included power cord is for use with this unit only. Do not use it with other
equipment.
If you are not going to use the unit for an extended period of time, disconnect
the power cord from the wall outlet. Whenever the power cord is plugged into
the wall outlet, it will draw some power, even when the unit is off.
Component/Standard (composite) video cables carry only video information;
separate audio cables are required for a complete connection.
HD—High-resolution component video input
TM
connection is necessary to receive 1080p
®
Digital decoder, amplifier, or home theater
®
Introduction
TV back panel connections
"Connecting a Blu-
or VCR"
TM
®
21
Blu-ray
TM
Digital or