7) VESA Mounting Pattern
TV Size
Hole Pattern (HxV)
32"
200mm x 200mm
40"
200mm x 200mm
50"
400mm x 200mm
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2) Remove the stand screws shown in the diagram
below. This will allow removal of the pedestal stand.
3) Once you have removed the screws holding the
pedestal stand in place, remove the pedestal stand
from the TV.
32" TV.
VESA Mounting Pattern
Two stand screws
(Sample Illustration)
40" TV.
VESA Mounting Pattern
Four stand screws
(Sample Illustration)
Screw Size
M6
M6
M8
Hook for attaching
the strap
(as short as possible)
Hook for attaching
the strap
(as short as possible)
50" TV.
VESA Mounting Pattern
Four stand screws
(Sample Illustration)
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy strap
from the hook(s) on the rear of the TV to a wall stud,
pillar, or other immovable structure. Make sure the
strap is tight, secure, and parallel to the floor.
7
Hook for attaching
the strap
(as short as possible)