Gabarron ECO1 Installation Manual And User's Manual page 6

9. - Place the storage bricks carefully, with the flat side facing the back of the heater. Arrange two row levels of bricks.
10. Place the heating elements again in their original position. Place the other two rows of storage bricks with the flat side facing
the exterior and always on the heating elements supporting tabs.
11. Refit the inner front panel. If the bricks have been fitted correctly you will find no difficulty in refitting this panel. Please check
the insulation panel is also properly fitted. Please see below:
12. - Connect again the two Faston connectors to the aluminum heating element and to the safety thermostat.
13. - Fit again the exterior front panel by connecting first the joints in its upper part. Then push its lower part until the lower
edge lay on the plastic rests.
14. - Fix the front panel with screws.
RIGHT
POSSITION
6
WRONG
POSSITION