Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Maytronics Hybrid
Summary of Contents for Maytronics Hybrid
-
Page 1: Operating Instructions
Hybrid - Robotic Suction Pool Cleaner Operating Instructions 8151170... -
Page 3: Table Of Contents
Contents ❙ ❙ The Hybrid Suction Cleaner ......2 Parts ..............2 Warnings ............3 Specifications ...........3 Water conditions ..........3 Pool Preparation ..........3 Setup ..............3 Cleaning Process ..........6 Clean the Leaf Canister ........6 Removal from the Pool and Storage ....7 Troubleshooting ..........7... -
Page 4: The Hybrid Suction Cleaner
The Hybrid Suction Cleaner ❙ ❙ The Hybrid Cleaner is powered by the pool pump. For successful cleaning results, make sure that you connect the cleaner properly to the pool system. Follow the instructions in this booklet for easy, efficient, and safe operation. -
Page 5: Warnings
Setup ❙ ❙ Connect the Hose The Hybrid Cleaner connects to the pump of your pool, either by a built-in dedicated suction line or through one of the pool skimmers. Connect the Hose Sections in the pool under water. Switch the pool pump OFF. - Page 6 Continue connecting additional sections until the hose is long enough to reach from its pool connection to the most distant edge of the pool, plus two extra sections. Make sure to add the Float 40 cm (1.30 Ft) above the Hybrid Cleaner on the last Hose Section (Drawing F).
- Page 7 • Backwash the main filter and clean the skimmer and pump basket. • Open unused skimmers partially (if closed). • If the Hybrid Cleaner is connected to a dedicated suction line, adjust its Above MAX. control valve on the pool pump.
-
Page 8: Cleaning Process
Blue — slow blinking Proper functioning — The Hybrid Cleaner is moving forward. Blue — fast blinking Proper functioning — The Hybrid Cleaner is making a turn. Blue and red (2 sec.) Proper functioning — The Hybrid Cleaner identifies a wall. -
Page 9: Removal From The Pool And Storage
Troubleshooting ❙ ❙ The Hybrid Cleaner is designed to operate with a minimum of user maintenance. If a problem does occur, try to determine the cause. Often, the solution is already part of the standard operating instructions in this booklet. If you cannot solve the problem easily, contact your supplier. - Page 10 Air bubbles at the exit of the water from the 1. Ensure that the hoses are firmly fastened. jets, or a noise of air suction 2. Ensure that the Leaf Canister lid is firmly closed. Hybrid - Robotic Suction Pool Cleaner Operating Instructions...
- Page 12 Hybrid - Robotic Suction Pool Cleaner www.maytronics.com...
Need help?
Do you have a question about the Hybrid and is the answer not in the manual?
Questions and answers