Panasonic KX-TDA15 User Manual page 97

• In addition to the caller information that is recorded in the Call Log, the following SVM Log
information is recorded with voice messages left by callers:
• Caller's Name
• Caller's Telephone Number
• Time recording started
• Voice Message Status
– "New" is displayed for voice messages that have not previously been listened to.
– "Old" is displayed for voice messages that have previously been listened to.
• You can lock the SVM Log display by using an extension PIN (Personal Identification Number)
to prevent other users from viewing the information and from playing back your voice
messages (Display Lock). Refer to "3.1.2 Settings on the Programming Mode".
• If your telephone has a Message for Another Extension button, you can access the message
box of another extension and listen to voice messages for that extension.
• If a new voice message has been left in your message box, you will hear dial tone 4 after going
off-hook. In addition, if your telephone has a Message button or Message/Ringer Lamp, the
corresponding button or lamp will light when a voice message has been left.
Dial Tone 4
1 s
• The following operations are available by entering the corresponding number while you hear
the recorded voice message.
– 1: To play back the voice message from the beginning (without a confirmation tone)
– 2: To go to the next voice message
– 3: To clear the voice message
(Press the AUTO DIAL/STORE button or enter 1 to confirm.)
– 4: To call back the caller who left the voice message
– 5: To go back to the previous voice message
– #6: To leave a voice message directly in the message box of another extension
(Enter desired extension number.)
– #8: To play back your greeting message and record a voice message in your own
message box
– #9: To end the call
– # : To play back the voice message from the beginning (with a confirmation tone)
1.5 Before Leaving Your Desk
User Manual 97