Table of Contents
Advertisement
8.7.1.1 How to do a split-mirror backup
This same procedure can be used with just one mirrored copy of a logical
volume. If you remove a mirrored copy of a logical volume (and file system),
and then create a new logical volume (and file system) using the allocation
map from that mirrored copy, your new logical volume and file system will
contain the same data as was in the original logical volume.
Now, you can mount this new file system (read-only is recommended), back it
up, and you are really backing up a mirrored copy of the data in the original
file system, as it was when we removed the mirror copy. Since this file
system, created from the mirror copy, is mounted read-only, no inconsistency
in the file system from the point at which you removed the mirror originally is
created during the backup. After that, you can delete the new file system to
release the physical partitions back to the free pool. Finally, you can add and
synchronize a mirror back onto the original file system, and you are back to a
mirrored mode of operation, with fully updated data.
The
command of AIX does much of the work required to
splitlvcopy
implement this solution.
We can summarize the steps to do a split-mirror backup of a file system as
follows:
1. Use the
lsvg -l VGNAME
that contains the file system you want to back up.
2. Stop any application using the file system and unmount the file system.
3. Use the
splitlvcopy
volume, and create a new logical volume with its contents. For example, if
the existing logical volume is named fslv, the command would be
splitlvcopy -y newlv fslv
4. It is important to note that there is now one less mirror copy available to
the user in fslv.
5. Remount the file system and restart the application that was using it.
6. You can see that the application and data are offline for only a very short
time.
7. Create a file system on your new logical volume and mount it read-only.
This is to ensure that no update activity will occur in the new logical
volume, and the consistency of the file system is guaranteed.
8. Perform the backup on the new file system by any means desired, such as
backup, tar, cpio,
command to take note of the logical volumet name
command to break off one mirror of the logical
.
and
.
pax
Cluster Management and Administration
177
Advertisement
Chapters
Table of Contents
Troubleshooting
