Table of Contents
Advertisement
SCR33
User's Manual
Door Alignment and Adjustment
Align and adjust the door if it is not level, or is not
sealing properly.
If the door is not sealed the unit may not cool
properly, or excessive frost may form in the interior.
IMPORTANT
Properly aligned, the door's gasket should be firmly
in contact with the cabinet all the way around the
door (no gaps). Carefully examine the door's
gasket to assure that it is firmly in contact with the
cabinet. Also make sure the door gasket is not
pinched on the hinge side of the door.
To align and adjust the door:
1. Loosen (do not remove) top and bottom hinge
screws.
2. Align door squarely with cabinet.
3. Make sure gasket is firmly in contact with cabinet
all the way around the door (no gaps).
4. Tighten bottom hinge screws.
5. Tighten top hinge screws.
Door Swing Change
Location of the unit may make it desirable to mount
the door on the opposite side of the cabinet.
Reversing the door
The Hinge hardware will be removed and
reinstalled on the opposite side of the cabinet.
The top hinge plate is flipped over when it is
reinstalled on the opposite side of the cabinet.
May 2011
Page 7
Advertisement
Table of Contents
