Table of Contents
Advertisement
SCR33
User's Manual
Installation
Your unit has been designed for either
free-standing or a built-in installation. When built-in,
your unit does not require additional air space for
top, sides or rear. However, the front grille must
NOT be obstructed and clearance is required for an
electrical connection in the rear.
CAUTION
Unit can NOT be installed behind a closed cabinet
door.
WARNING
SHOCK HAZARD — Electrical Grounding
Required.
Never remove the round grounding prong from the
plug and never use a two-prong grounding adapter.
Never use an extension cord to connect power to
the unit.
IMPORTANT
Electrical installation must observe all state and
local codes. This unit requires connection to a
grounded (three prong), polarized receptacle that
has been placed by a qualified electrician.
The unit requires a grounded and polarized 115
VAC, 60 Hz, 15A power supply (normal household
current). An individual, properly grounded branch
circuit or circuit breaker is recommended. GFCI
(ground fault circuit interrupter) is usually not
required for fixed location appliances and is not
recommended for your unit because a GFCI could
be prone to nuisance tripping. However, be sure to
consult your local codes.
Cut-Out Dimensions
Follow the cut-out drawing The 15-1/4" width allows
1/4" for ease in installation and removal of the unit.
24" is the cabinet depth in most installations.
May 2011
Page 4
Advertisement
Table of Contents
