Assembling The Handle - Recharge Mower PMLI-20 Operator's Manual

ASSEMBLING YOUR MOWER
Parts List
• Mulch plug (Installed at the rear of the mower at the factory)
• Grass catcher bag
• Side discharge chute
• 36V Battery (Pre-installed at the factory)
• Battery Charger
• Manual
Note:
• Carefully remove the parts from the box.
• Inspect the parts carefully in order to verify that no breakage or damage occurred during shipping.
• Do not discard the packing material until all parts have been examined.

ASSEMBLING THE HANDLE

1. Remove any packing material which may be between the upper and lower handles for shipping purposes.
2. Pull up and back on the upper handle to raise the handle into the operating position. Make certain the lower handle is
seated securely into the handle mounting bracket (see Fig. 2).
3. Align the holes (3) between the upper handle (1) and lower (2) handles. Insert the bolts (4) and tighten them with the
wing nuts (5) provided.
4. Secure the lower handle to the bracket with the handle knob (6) in each side (Fig. 3).
9