Recharge Mower PMLI-20 Operator's Manual page 11

ASSEMBLING YOUR MOWER
INSTALL THE SIDE DISCHARGE CHUTE
(see Fig.5)
This mower has 3 different functions - mulch, side discharge and rear bag. If you wish to discharge the clippings
rather than mulch, perform these steps.
1. REMOVE SAFETY KEY AND WAIT FOR BLADE TO COME TO A COMPLETE STOP.
2. Lift the side discharge cover (1).
3. Align the grooves on the discharge chute (2) with the pins on the underside of the discharge cover (1).
4. Lower the discharge chute (2) until the hooks on the mower deck are secured in the openings in the discharge
chute (2).
5. Release the side discharge cover (1).
11