The Fat Sampler
International dairy authorities, as well as most local dairy authorities, require
the sampling of milk during the milking process. Mounting a fat sampler
enables the dairy to comply with these regulations.
Mounting the Fat Sampler
The fat sampler is mounted between the outlet port and the elbow joint to the
milk line.
NOTE:
Connector to outlet port
Sampler replacement
tube
Elbow joint
to milk line
Fat Sampler Operation
The fat sampler is made up of a sampling bottle and a sampler head.
Milk is sampled each time the meter body is emptied. As the milk flows out of
the milk meter body, a small quantity is diverted by the sampler head into the
sampler bottle. This method assures sampling during all stages of the milking
session.
28
During normal milking, when not sampling, a sampler
replacement tube fills the gap reserved for the fat sampler.
Afi-lite User Manual
Sampler
Sampler
bottle holder
P/N 9040310