Operating The Afi-Lite Milk Meter; Milking With Afi-Lite Milk Meters - Afikim Afi-lite Plus User Manual

Operating the Afi-lite Milk Meter

This section contains instructions on the milking process and on displaying cow
information.

Milking with Afi-lite Milk Meters

1. Turn on the milk meters.
Then for several seconds the identification number of each milking point
appears:
(for example
The LED in the cleaning mode key glows,
meter is in cleaning mode.
In stand-alone systems after the identification appears,
displayed.
2. Press the
cleaning mode and the milk meter enters into milking mode.
3. Press the
4. Bring the cows into the milking parlor. As each cow is identified at
her milking point, her cow number is displayed on the control panel
(for example
• If the cow at a station is not identified,
to flash. (In a stand-alone system
displayed.)
If a cow number is not displayed, type the number of the cow and
then press
• If the cow has been assigned a code, such as
code will flash
More information on codes and messages is in the following section.
February 27, 2003
this page updated June 16, 2003
), followed by
key of each Afi-lite milk meter. This cancels the
key of each milk meter. This shuts off the vacuum
and retracts the cluster.
).
.
alternately with the cow number
Afi-lite User Manual
appears. ( indicates pulsation.)
.
indicating that the milk
continues
continues to be
("colostrum cow"), the
is
.
5