Changing Values of Cluster Removal Parameters
To change the values of cluster removal time spans, proceed as follows for each
parameter, at each milk meter:
1. Enter programming mode:
Press
,
2.
Navigate to respective
"family" of
parameters.
To reach parameters
and
, press
simultaneously.
appears for a few
seconds.
st
Then
(1
parameter in
the "family") appears.
To reach parameters
&
simultaneously.
appears for a few
seconds.
st
Then
(1
parameter in
"family") appears.
* The desired parameter can also be reached by waiting for the 1
Then press
February 27, 2003
and
simultaneously.
3.
While
,
,
respective short-cut key: *
&
For
, press short-cut
For
, press short-cut
For
, wait a few seconds
until
is replaced by
, press
While
press short-cut
to scroll down, or press
and
Navigate to desired
parameter.
appears, press
.
.
.
appears,
. *
to scroll up to the desired parameter
Afi-lite User Manual
alternate on the display.
4. Type the new
value of the
parameter.
Examples:
, eg. – 30
(sec.)
, eg. – 14
(½ min.)
, eg. – 15
(x 10 sec.)
, eg. – 2
(sec.)
st
parameter to appear.
5. Enter the
value & exit
programming
mode.
Press
&
simultaneously
to enter the
new value,
or press
to abort the
change and
exit
programming
mode.
.
17