Cleaning & Maintenance - Honeywell CO60PM Owner's Manual

CLEANING & MAINTENANCE
Important - Please Read!
•
The cooler is supplied with Honeycomb Cooling Media.
•
The cleaning frequency for the Honeycomb media depends on local air and water
conditions. In areas where the mineral content of water is high, mineral deposits may build up
on the Honeycomb Cooling Media and restrict air flow. Draining the water reservoir and
refilling with fresh water at least once a week will help reduce mineral deposits. If mineral
deposits remain on the Honeycomb media, the media should be removed and washed under
fresh water. The media should be cleaned every two months or sooner, depending on your
needs.
•
Do not run the unit in COOL mode with stale water in the tank. Empty the tank and refill it
with fresh water if the water has been standing in the tank for an extended period of time.
•
For best results, allow the Honeycomb Cooling Media to dry after each use by turning off the
cool function 15 minutes before turning the unit off.
WARNING
•
Before cleaning, turn the unit off and disconnect from the power source.
•
Use a damp cloth to remove dirt and dust from the outside of the unit.
•
Never use abrasive cleaners.
•
When the unit is not in use, store it in a dry place, out of direct sunlight.
ENG
13