Safety - Honeywell CO60PM Owner's Manual

SAFETY

Read And Save These Instructions:
When using electrical appliances, basic safety precautions should always be followed:
Your cooler runs on 120 Volt AC, 60 Hz current. Check the
•
household voltage to ensure it matches the appliance's rate
specification.
Before operating the product remove it from its packaging
•
and check that it is in good condition.
DO NOT operate any product with a damaged cord or plug.
•
We recommend not using an extension cord with this appli-
ance.
DO NOT run power cord under carpeting, or cover it with
•
rugs or runners. Keep the cord away from areas where it may
be tripped over.
Always unplug the product before refilling the water tank.
•
Always unplug the appliance from the power source before
•
cleaning, servicing or relocating the unit.
Remove the power cord from the electrical receptacle by
•
grasping and pulling on the power cord plug-end only, never
pull the cord.
DO NOT use the product in areas where gasoline, paint or
•
other flammable goods and objects are stored.
When using the ''COOL'' setting, check the water tank to
•
ensure that it is full. Operation of this cooler on the ''COOL''
setting with an empty tank may result in damage to the water pump.
Warning: To reduce the risk of fire or electric shock, do not use this appliance with any solid-
•
state speed control device.
120V - 60 Hz
Shock Hazard
MAX
MIN
Water Level Indicator
ENG
5