Table of Contents
Advertisement
Available languages
Available languages
CLEANING & MAINTENANCE
Appliance Maintenance:
1.
Turn off the appliance before disconnecting the power supply.
2.
Only clean the appliance with a soft dry cloth.
Dust Filter Maintenance:
The dust filter is to be cleaned every two weeks to maintain
air cooling efficiency. Please follow the below instructions
to clean the dust filter:
1.
Turn off the appliance and remove the upper dust filter.
2.
Rinse in lukewarm water. After cleaning, dry in
a shaded and cool place, then reinstall.
End of Season Storage & Maintenance:
If the appliance will not be used for a long time, follow these steps:
1.
Be sure to drain the leftover water condensate. Remove the lower drain plug and use a
shallow pan to collect the water (make sure to replace the drain plug when finished).
2.
To dry excess moisture, run the unit in Fan-only mode for 30 minutes before storing.
3.
Turn off and unplug the air conditioner from the power supply.
4.
Remove the dust filter and clean with water. Dry the dust filter and then reinstall.
5.
Disconnecting the Window Installation Kit:
•
Carefully remove the exhaust hoses from the back of the unit.
•
Carefully remove and uninstall the Window Bracket and Window Panel Adapters
from the window.
•
It is recommended to store the Window Kit parts in a bag together with the Remote Control
and place them together with the air conditioner unit.
•
If needed, you can clean the Window Kit with a damp cloth before storing.
Make sure all parts of the Window Kit are dry before storage.
6.
Cover the air conditioner with a cloth before storage to protect from dust and scratches collecting
on the surface of the unit.
7.
It is recommended to coil the power cord before storing to ensure the cord is protected from
dents and creases.
8.
Store the air conditioner in a cool, dry place, away from direct sunlight.
Upper Dust Filter
EN
13
Advertisement
Table of Contents
