Software Setup
Logging
The AP can store up to 1024 log entries. See Chapter 7 for details
of the logged data and data collection methods.
Log collection function
This specifies whether or not to enable logging. The collected log
data is stored in internal memory.
Overwrite setting
This specifies whether or not to overwrite old data when the
number of log entries reaches the maximum. If disabled, log
collection halts when the maximum number of entries is reached.
The factory default setting is "Enable Log Overwriting".
Log collection start time setting
This specifies whether or not to set a logging start time. If enabled,
set the time at which to start logging. The factory default setting is
"Do Not Specify".
Others
Initialize settings
If "Restore Defaults" is selected, all settings other than the IP
address, subnet mask, and default gateway are reset to their factory
default values.
78
FX-DS110-APE