Figure 5.12. Ip Address Setting Screen (2) - Contec FX-DS110-APE User Manual

Setup Preparation
(2) Select [1. IP Address] and enter the IP address assigned to the
(3) Select [2. Sub-Net Mask] and enter the sub-net mask for the IP
(4) Enter [M] to return to the previous menu and select

Figure 5.12. IP Address Setting Screen (2)

(5) Select [1. Default Gateway] and enter the IP address of the
(6) Press the [W] key or return to the top menu and select
56
AP on the wired LAN.
address set in step 2.
[1. Parameters]
default gateway.
You do not need to enter an IP address if there is no default
gateway.
[3. Writing] to save the settings, then enter [BYE] or return to
the top menu and select [1. Exit] to disconnect the terminal.
This completes network setup. You can now use a web
browser for setup and perform network management using
SNMP.
FX-DS110-APE