Chapter 1 Reference Documents , Required Equipment
Reference Documents
MPX 110 Owner's Manual - Lexicon P/N 070-14956, latest revision
Required Equipment
TOOLS
The following is a minimum suggested technician's tool kit required for performing disassembly, assembly
and repairs:
•
Clean, antistatic, well lit work area.
•
#1 Phillips tips screwdriver
•
3/16" Hex Nut Driver,
•
TORX T9 screwdriver
•
Hex Nut Driver with 15mm socket.
•
5/16" Hex Nut driver, full hollow
•
Plastic insert for the 5/16" nut driver to prevent Front Panel from scratches.
•
Solder: 63/37 - Tin/Lead Alloy composition, low residue, no-clean solder.
•
Magnification glasses and lamps
•
SMT Soldering / Desoldering bench-top repair station
TEST EQUIPMENT
The following is a minimum suggested equipment list required to perform the proof of performance tests.
• Digital Volt Meter
• Low Distortion Sine Wave Audio Oscillator
• Distortion Analyzer and Level Meter with single-ended or balanced input, switchable 30kHz high-
pass filer or audio bandpass (20-20kHz) filter
• Stereo Headphone Amplifier
• 2 Audio cables unbalanced and shielded with phone plugs on one end and appropriate
connectors on the opposite ends for headphone amplifier input
• 2 Audio cables unbalanced and shielded with phone plugs on one end and appropriate
connectors on the opposite ends for the Audio Oscillator output
• 9V AC adapter (Lexicon type or equivalent; 1.9 amp)
• Lexicon Double Footswitch (Lexicon P/N 750-09277) w/15' ¼" phone plug cable configured for tip,
ring & sleeve or equivalent.
• Cable (6ft minimum) with 1/4" to 1/4 stereo phone plugs (Switchcraft # 10BK10 or equivalent)
Lexicon
1-1