Disposal; Specifications - Quickie Tango Instructions For Use Manual

14.0 specification sheets (en 12184 & Iso 7176-15)
Sunrise Medical S.L.
Polígono Bakiola, 41
48498 Arrankudiaga – Vizcaya
España
Tel.: +34 (0) 902142434
Fax: +34 (0) 946481575
www.sunrisemedical.com
model: quickie tango
Maximum occupant mass
(test dummy mass): 125 kg
The wheelchair Quickie
Tango conforms to the
following standards:
a) requirements and test
methods for static, impact
and fatigue strengths
(ISO 7176-8)
b) power and control systems
for electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in accordance
with ISO 7176-9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is specified as
a Class B power chair
f) all materials used on this
product conform to EN1021
parts 1 and 2.
Operating temperature: - 25°C to 50°C
Storage temperature: -40°C to 65°C
Moisture resistance: IPx4
No restrictions on humidity and air pressure
Iso 7176-15
Overall length (Inc. Leg rest)
Overall width
Total mass (with batteries)
Mass of the heaviest part
Static stability downhill
Static stability uphill
Static stability sideways
Energy consumption (max. range)
Dynamic stability uphill
Obstacle climbing (with kerb climber) 50mm
Max. speed forward
Min. brake distance from max. speed -
Seat plane angle (set with tools)
Effective seat depth
Effective seat width
Seat surface height at front edge
Back rest angle
Back rest height
Footrest to seat distance
Leg to seat surface angle
Armrest to seat distance
Front location of armrest structure
Min. turning radius
Nominal battery voltage
Battery cut-off voltage
Battery fusible links
Quickie direct actuator control box
fusible link
Mass of test dummy
en 12184
Max. kerb height
Ground clearance
Turning space/Reversing width
Speed control operation force
Direction control operation force
mIn. max.
1070mm 1100mm 70° hangers
580mm 600mm (12."-14" wheels)
85kg 100kg
- 16.5kg Heaviest removable part
- 20° 3° tilt + 3° recline
- 14° 3° tilt + 3° recline
- 18° 3° tilt + 3° recline
- 25km 6kph motor & 100kg user
- 10° Max. Safe Slope = 10°
(18%)
(100mm)
6kph
- Depends on programming
0° 9° 3° Increments
425mm 500mm 25mm increments
(400mm) 500mm (Using pads)
- 450mm @ 3°Seat angle
-3° 12° Set with tools
450mm 500mm 25mm increments
290mm 460mm
110° -
270mm 355mm 7mm increments
370mm 390mm
900mm 70° Hanger
24V
16V
- 150A In-line fuse on each battery
- 6.3A 5x20mm Schurter fuse
- 125kg
mIn. max.
50mm (100mm) (With kerb climber)
80mm 90mm 12" - 14" wheels
1300mm -
2N
1N
comments
comments
41
Quickie Tango