Remote Start Time-Out Alert; Manual Transmission Start (Mts Mode) - Python 5706P Owner's Manual

Note
Temperature report must be turned on by an authorized Di-
rected dealer.

Remote Start Time-out Alert

During remote start a message is sent three minutes before and again
at one minute before the engine turns off. The
with tones as an alert to reset the runtime if desired.

Manual Transmission Start (MTS mode)

When installed into a manual transmission vehicle, the system requires
that the MTS mode is properly set when parking. If MTS mode is not
properly set or is defeated after being properly set the system will not
start the engine and the
an alert.
With the engine running, set the parking brake and leave the
1.
engine running. For Pit Stop or Turbo Timer mode (to leave the
engine running after arming) open the driver door.
Release the foot brake (if pressed during Step 1), or press and
2.
release the foot brake anytime. As long as the engine is running
there is no time limit to perform this step.
Within 20 seconds of foot brake release, press any command
3.
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command from the Advanced Start menu
screen).
4. The parking lights flash 5 times to confirm MTS mode enable and
the remote start activates the ignition outputs. The
text and beeps play to confirm.
Turn Off and remove the key from the ignition switch, the engine
5.
remains running.
© 2012 Directed. All rights reserved.
REMOTE START ERROR
text plays
RUNTIME LOW
text and tones play as
REMOTE START ON
37 37