Powersaver; Display Modes - IBM 31P6240 User Manual

E54-4p.fm Page 11 Tuesday, January 16, 2001 2:19 PM
This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor into a low-power mode when it has not been used for a
certain amount of time. The monitor automatically returns to normal operation when you
move the computer's mouse or press a key on the keyboard. For energy conservation, turn
your monitor OFF when it is not needed, or when leaving it unattended for long periods.
The PowerSaver system operates with a VESA DPMS compliant video card installed in your
computer. Use a software utility installed on your computer to set up this feature.
State Normal Operation
Power Indicator Green
Power 75 W (Maximum)
Consumption 61 W (Nominal)
NOTE: This monitor is EPA E
computer equipped with VESA DPMS functionality.
Display Mode
IBM, VGA2, 720 x 400
IBM, VGA3, 640 x 480
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768

PowerSaver

Power-off Mode (EPA/ENERGY 2000)
Green, Blinking (1 sec. interval)
S ® compliant and ENERGY 2000 compliant when used with a
NERGY TAR

Display Modes

English - 11
Less than 3 W
Vertical Frequency (Hz)
70
60
75
85
75
85
75
85