Step 2: Slide Intermediate Sections Into The Stationary Sections - AMX MAX Servers Operation/Reference Manual

FIG. 58 Attaching the Chassis Sections to the server chassis

Step 2: Slide Intermediate Sections Into the Stationary Sections

1. Slide the Intermediate Section into the Stationary Section, from the rear end of the Stationary
Section, as shown in FIG. 59.
2. Press the Locking Tab on the Stationary Section to allow the Intermediate Section to slide fully into
place.
Breaker tab
(rear)
FIG. 59 Sliding the Intermediate Section into the Stationary Section
3. Slide the Intermediate Section in, to the point that the Breaker tab on the Intermediate Section rests
against the Stopper on the top guide-rail on the Stationary Section, and the locking tab snaps into
place.
MAX Servers: HT Home Theater and MMS Multimedia Servers
(rear)
(front)
Chassis Sections
The Locking Tab on each Chassis Section should
be oriented towards the rear of the server
HT Server chassis
Stopper
Breaker Post (on Intermediate Section)
Locking tab hole
Stopper (on Stationary Section's top guide-rail)
Rack Mounting MAX Servers
(front)
Locking tab
67