Table of Contents
Advertisement
3.
Make sure the scan code leg is aligned with the
proper hole, and insert the quadruple key. Be
careful not to bend the springs attached to the key.
4.
Label the key cap. Attach the key cap on top of the
key.
_________________________________________________________________________________________
Replacing an unused key cover
Removal
1.
Pinch the unused key cover with the removal tool.
Pull up on the unused key cover.
Attaching
Note: Make sure the keys, rubber rings, and key
guides are all removed from the place where the
unused key cover will be inserter.
1.
Insert the unused key cover as shown in the
figure.
20
IBM 4685-K03 Installation, Operation and Maintenance Guide
Key
Spring
Removal tool
Key cover
Unused key
cover
Advertisement
Table of Contents
