Table of Contents
Advertisement
_________________________________________________________________________________________
Replacing a double key
Removal
1.
Pull off the key cap with the removal tool. (See
"Replacing a single key" on page 17.)
2.
Pinch the key lightly with the removal tool, and
pull it out. Be careful not to bend the springs
attached to the key.
3.
Remove the two rubber rings (black and brown).
4.
Remove the key guide by using the opposite end
of the removal tool.
Key
Spring
Rubber rings
(Black)
Chapter 4 Replacing the key
Removal tool
(Brown)
Key guide
17
Advertisement
Table of Contents
