Table of Contents
Advertisement
Chapter 4 "Replacing the keys"
_________________________________________________________________________________________
Replacing a single key
Removal
1.
Pinch the key cap lightly with the removal tool,
and pull it up, rocking it to the left and right.
2.
Pull out the key in the same way as the key cap.
Be careful not to bend the spring attached to the
key.
You are free to change the layout of the keys except for the ten keys of the numeric keypad.
For example, frequently used keys can be made into larger double keys by replacing two
single keys with one double key.
This chapter explains how to replace single keys, double keys, quadruple keys, and
unused key covers on the keyboard.
Before replacing keys, put the POS terminal into standby mode
(system lamp off) by pushing the standby button.
Key cap
Key
Removal tool
Spring
Chapter 4 Replacing the key
15
Advertisement
Table of Contents
