Pioneer XV-EV61 Service Manual page 118

1
Error Name
SPINDLE ERROR (0 x 6∗)
A
Spindle on error
Spindle off error
Spindle lost error
Spindle CAV error
Spindle CLV error
SPINDLE TIMEOUT (0 x 7∗)
Spindle on timeout
Spindle off timeout
Spindle lost timeout
B
Spindle CAV timeout
Spindle CLV timeout
ACQUISITION ERROR (0 x 8∗)
PLL lost error
ACQUISITION TIMEOUT (0 x 9∗)
PLL lost timeout
DECODER ERROR (0 x a∗)
ID lost error
C
DECODER TIMEOUT (0 x b∗)
ID lost timeout
DEVICE ERROR (0 x d∗)
SRAM error
FAILSAFE (0 x e∗)
Unexpected error
D
E
F
118
1
2
No. Causes
0 x 61 Spindle on could not be completed
0 x 62 Spindle off could not be completed
0 x 63 Spindle lost control
0 x 64 CAV on could not be completed
0 x 65 CLV on could not be completed
0 x 71 Did timeout at spindle on
0 x 72 Did timeout at spindle stop
0 x 73 Did timeout at spindle backup
0 x 74 Did timeout at CAV on
0 x 75 Did timeout at CLV on
0 x 83 PLL is lost
0 x 93 Did timeout at PLL backup
0 x a3 ID is not readable
0xb3 Did timeout at ID backup
0 x d1 Cannot access SRAM
0 x e1 Unexpected error
XV-EV61
2
3
Check Item
Are not there a dirt or a scratch in
1. Spindle motor
the Disc?
2. Spindle driver
Is FG output from the driver?
Is spindle rotating? 1. Spindle motor
Is FG output from the driver? 2. Spindle driver
Is the PDM output from Front End? 3. Front End IC
Are not there a dirt or a scratch in
1. Pickup
the Disc?
2. Front End IC
Are not there a dirt or a scratch in
1. Pickup
the Disc?
2. Front End IC
Are not there a dirt or a scratch in
1. Pickup
the Disc?
2. Front End IC
Are not there a dirt or a scratch in
1. Pickup
the Disc?
2. Front End IC
1. SRAM
Power supply of SRAM
2. Front End IC
Is not bus line short-circuiting?
3. Front End-SRAM bus line
1. software runaway
3. Software bug
3
4
Possibility of Trouble Remarks
4