Handle Assembly - sunjoe MJ401E Operator's Manual

Assembly
m
CAUTION
Inspect wiring, which, if damaged during shipping,
may cause serious bodily injury during equipment
use. If any damage is seen or suspected, do not
assemble. Instead, contact Sun Joe customer service
(1-866-766-9563) for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Before using the mower, follow these
instructions to assemble the Handle and
Grassbox.

Handle Assembly

1. Fit the lower handle into the two holes in the machine
body (A) and fasten them with the screws (B) provided.
.
Figure 3
A. Machine body
m
A
B
B. Screw
6
2. Slide the wire management 'Clip' (C) onto the upper handle (D).
3. Join the upper handle (D) to the lower handle (E) by means
of the knob (F), plastic washer (G), and bolts (H) provided.
C
H
E
Figure 4
C. Cable relief
D. Upper handle
E. Lower handle
F. Tighten knob
G. Plastic washer
H. Bolts
D
G
F