Carton Contents; Handle Assembly - sunjoe MJ401E Operator's Manual

14-inch 12-amp electric lawn mower
Hide thumbs Also See for MJ401E:
Table of Contents

Advertisement

Unpacking

Carton Contents

• Electric lawn mower
• Grass bag
• Grass bag support rod
• Upper handle
• Upper handle knob and bolt assembly (2)
• Lower handle
• Lower handle screws (2)
• Cable relief holder
• Cable clip (2)
• Spanner
• Manual
1. Carefully remove the lawn mower and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you find damaged
or missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
department at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric lawn
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
Assembly
m
CAUTION!
Inspect wiring, which, if damaged during shipping, may
cause serious bodily injury during equipment use. If any
damage is seen or suspected, do not assemble. Instead,
contact Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563) for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
NOTE: Before using the mower, follow these instructions to
assemble the handle and grass bag.

Handle Assembly

1. Fit the lower handle into the two holes in the machine
body and fasten the handle on both sides with the screws
provided (Fig. 1).
+ Sun Joe
customer service
®
®
m
customer service
®
Fig. 1
2. Slide the cable relief holder onto the upper handle (Fig. 2).
Fig. 2
Upper handle
Cable relief
holder
3. Join the upper handle to the lower handle using the knob,
plastic washer and bolt provided (Fig. 3). Repeat on the
opposite side.
Fig. 3
Bolt
6
Lower handle
Machine body
Screw
Upper handle
Plastic washer
Knob

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents