Grassbox Assembly & Fitting
1. Fit the support rod (A) into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine.
Figure 5
A. Support rod
2. Place the protective plastic profiles (B) onto the "U" rod.
B
Figure 6
B. Protective plastic profile
3. Raise the spring loaded rear door (C) and move the basket
up to the mower body. Fasten it onto the coupling hooks (D).
A
C. Rear door
4. Release the rear door to secure the basket in position.
7
C
D
Figure 7
D. Coupling hooks
Figure 8