Carton Contents; Handle Assembly - sunjoe MJ404E-360 Operator's Manual

Electric lawn mower
Table of Contents

Advertisement

Unpacking

Carton Contents

• Electric lawn mower with lower handle
• Upper handle
• Upper handle knobs and bolts (2)
• Grass collection bag
• Grass collection bag handle
• Spanner wrench
• Manual and registration card
1. Carefully remove the lawn mower and check to see that all
of the above items are supplied.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you find damaged
or missing parts, DO NOT return the unit to the store.
Please call the Snow Joe
department at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric lawn
mower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
m
WARNING!
The product must be fully assembled
before operation. Do not use a product that is only partially
assembled or assembled with damaged parts.
NOTE: Before using the lawn mower, follow these instructions
to assemble the handle and the grass collection bag.
+ Sun Joe
customer service
®
®

Handle Assembly

1. Place the upper handle over the upper ends of the lower
handle. Align the holes. Use the two sets of upper handle
knobs and bolts to secure (Fig. 1).
Fig. 1
Upper handle
knob and bolt
Lower
handle
2. Clip the cable in the cable clips that are preassembled on
the handle.
Grass Collection Bag Assembly + Fitting
1. Clip the protective plastic straps onto the support rod of
the grass collection bag (Fig. 2).
Fig. 2
2. Insert the grass collection bag handle into the holes on the
top of grass collection bag until it clicks in (Fig. 3).
7
Upper
handle
Upper handle
knob and bolt
Protective
plastic straps

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents