Getting started
Gettingstarted
Please observe the safety information in the
Setting up the device
In order to ensure that the casing is sufficiently ventilated and to prevent overheating,
the device must only be operated with the base foot attached.
If the device is to be built-in, adequate ventilation must be assured.
Fit the base feet for horizontal or vertical operation (see
position", Page 15
Vertical operating position
Sidecover
Base feet
Operatingposition,vertical
Verticaloperatingposition
If you wish to operate the device in the vertical operating position, use
the two feet supplied for vertical operation.
Proceed as follows to prepare the device for the vertical operating position:
► Disconnect the cables if required.
► Lay the device on its top (narrow side) as shown, on a stable, flat and clean surface.
Fujitsu
and
"Horizontal operating position", Page
"Important notes", Page 9
"Vertical operating
18).
Getting started
chapter.
15