IBM 71P7279 User Manual page 105

v Adjust the audio-adapter volume control. See the documentation that comes
with your sound adapter and audio-CD player program.
v Turn off the computer, unplug the cables from the electrical outlets for your
computer and all attached devices, and remove the computer cover. Check
that the audio-signal cable connects the CD-ROM with the audio adapter.
You receive a common error message.
These are some common error messages and actions to take when they are
displayed.
v CDR-101
The Not ready reading the drivesituation occurs if you try to access the
CD-ROM drive before the drive is ready. The Busy indicator light comes on
when you attempt to access the drive after loading a CD into the CD tray.
Wait until the Busy indicator light turns off before attempting to access the
drive.
Appendix B. Problem solving
B-5