Double Insulated manual Paint Remover MODEL 7403 IMPORTANT Please make certain that the person who is To learn more about Porter-Cable to use this equipment carefully reads and visit our website at: understands these instructions before http://www.porter-cable.com starting operations. The Model and Serial No. plate is located on the main housing of the tool.
Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Porter-Cable strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed.
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
GENERAL SAFETY RULES Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS. SAVE THESE INSTRUCTIONS 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Page 5
GENERAL SAFETY RULES* continued d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
ADDITIONAL SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Disconnect the cord plug from the power circuit before changing abrasive discs.
Page 8
ADDITIONAL SAFETY RULES FOR PAINT REMOVAL Extreme care should be taken when removing paint. The peelings, residue, and vapors of paint may contain lead, which is poisonous. Exposure to even low levels of lead can cause irreversible brain and nervous system damage. Young and unborn children are particularly vulnerable.
Page 9
MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C.
G. Right Handle Boss FUNCTIONAL DESCRIPTION FOREWORD Model 7403 has been designed for safe, quick, easy removal of paint from clapboard, porches, masonry steps, patios, walls, etc. ASSEMBLY NOTE: This tool is shipped completely assembled. With the exception of the auxiliary handle, no assembly time or tools are required.
Page 11
The handle and collar may be tightened in any one of four positions (Fig. 3A through Fig. 3D). Move the handle and collar to the desired position and tighten securely. Fig. 3A Fig. 3B Fig. 3C Fig. 3D SPINDLE LOCK DISCONNECT TOOL FROM POWER SOURCE.
Page 12
Hold the spindle lock pin down while using the spanner wrench (B) Fig. 8 to firmly tighten the disc retaining nut. Fig. 6 Fig. 5 Fig. 7 Fig. 8 The Model 7403 is designed for use with specific discs and pads. The use of any other back-up pads or discs could be hazardous.
OPERATION HOW TO HOLD THE TOOL Hold the tool firmly with both hands (Fig. 9). Fig. 9 Fig. 10 TO START AND STOP THE TOOL To start the tool, depress the trigger (A) Fig. 10. To stop the tool, release the trigger.
Page 14
SIDE RAILS Two knobs (A) Fig. 12 are provided for controlling the movement of the side rails, above or below the pad. For manual instruction purposes, the right knob is on the same side of the motor frame as the sander handle. The right side rail is controlled by this knob.
Use a #24 or #36 grit carbide disc for this job since the grit on paper discs is quickly destroyed. Masonry is sanded in the same manner as wood. TROUBLESHOOTING GUIDE For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Porter-Cable help line at 1-800-487-8665.
All quality tools will eventually require servicing, or replacement of parts due to wear from normal use. For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers or call the Customer Care Department at 1-800-487-8665. All repairs made by our service centers are fully guaranteed against defective material and workmanship.
ACCESSORIES • A complete line of accessories is available from your Porter-Cable Delta • Supplier, Porter-Cable Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier.
PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.
Porter-Cable • Delta products should be obtained by contacting any Porter-Cable • Delta Distributor, Authorized Service Center, or Porter-Cable • Delta Factory Service Center. If you do not have access to any of these, call 888-848-5175 and you will be directed to the nearest Porter-Cable •...