Porter-Cable 7529 Instruction Manual
  1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Power Tool
  5. 7529
  6. Instruction manual

Porter-Cable 7529 Instruction Manual

Double insulated plunge router
Hide thumbs
Table of Contents

Advertisement

Quick Links

900468 - 07-11-02.qxd
7/25/02
Instruction
manual
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2002 Porter-Cable Corporation
9:23 AM
Page 1
ESPAÑOL: PÁGINA 17
FRANÇAISE : PAGE 35
Double Insulated
Plunge Router
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
MODEL 7529
Part No. 900468 - 07-11-02

Advertisement

Table of Contents
loading

Related Manuals for Porter-Cable 7529

Summary of Contents for Porter-Cable 7529

  • Page 1: Instruction Manual

    ESPAÑOL: PÁGINA 17 FRANÇAISE : PAGE 35 Double Insulated Instruction Plunge Router manual MODEL 7529 IMPORTANT To learn more about Porter-Cable Please make certain that the person who is visit our website at: to use this equipment carefully reads and http://www.porter-cable.com...

  • Page 2: General Safety Rules

    900468 - 07-11-02.qxd 7/25/02 9:23 AM Page 2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: ·...

  • Page 3: Personal Safety

    900468 - 07-11-02.qxd 7/25/02 9:23 AM Page 3 PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

  • Page 4: Specific Safety Rules And Symbols

    900468 - 07-11-02.qxd 7/25/02 9:23 AM Page 4 SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance Section of this manual.

  • Page 5: Replacement Parts

    900468 - 07-11-02.qxd 7/25/02 9:23 AM Page 5 SYMBOL DEFINITION ....... volts ....... amperes ....... hertz ....... watts ....... kilowatts µF ....... microfarads ....... liters ....... kilograms N/cm ....... newtons per square centimeter ....... pascals ....... hours ....... minutes ....... seconds .......

  • Page 6: Functional Description

    12-14 14-16 16-18 18-20 FUNCTIONAL DESCRIPTION FOREWORD MODEL 7529’s versatility - speed range of 8,000 to 23,000 RPM, collet sizes of ", " (optional) and ", dual plunge adjustments, and bit size up to 3 " diameter - allow it to handle the most demanding routing applications in various materials.
  • Page 7 900468 - 07-11-02.qxd 7/25/02 9:24 AM Page 7 Fig. 2 Fig. 3 Fig. 4 Insert the templet guide (A) Fig. 3, through the templet guide insert (B), and secure with a locknut (C). NOTE: Insert the templet guide through the side of the templet guide insert that has a recessed area (D) Fig.

  • Page 8: Operation

    7/25/02 9:24 AM Page 8 OPERATION SELECTING THE BIT Model 7529 accommodates bits with " and " diameter shanks that are installed into the power unit collet. A collet is also available that will allow use of bits having " diameter shanks.
  • Page 9 900468 - 07-11-02.qxd 7/25/02 9:24 AM Page 9 Engage spindle lock (Q) Fig. 10 by pressing on it while turning chuck (E) Fig. 10 until it locks into place. Tighten collet nut (D) Fig. 10 with wrench provided. To remove bit, loosen collet nut.
  • Page 10 900468 - 07-11-02.qxd 7/25/02 9:24 AM Page 10 Loosen depth rod locking knob (K) Fig. 9, and raise depth rod until indicator aligns with the graduation representing desired depth of plunge (The example in Fig. 13 shows setting for 1" plunge.) Tighten depth rod locking knob.
  • Page 11 900468 - 07-11-02.qxd 7/25/02 9:25 AM Page 11 Fig. 14 Fig. 15 Turn micro plunge adjusting knob counterclockwise until resistance is felt (Fig. 14). NOTE: This may require 20 or more revolutions. Release the router. Hold micro plunge adjusting knob (F) Fig. 8 while turning micro plunge adjusting ring (G) Fig.
  • Page 12 900468 - 07-11-02.qxd 7/25/02 9:25 AM Page 12 lower the bit, turn the knob counterclockwise. 10. The plunge locking lever (C) Fig. 8 should be set to the locked position after the bit height is adjusted and before the unit is turned on. Move the lever to the right as far as it will go.

  • Page 13: Overload Protection

    3 is approximately 18,000 RPM. OVERLOAD PROTECTION MODEL 7529 is equipped with a current sensing-type overload protector built into the variable speed control. This device will “trip” and turn the motor off if it experiences prolonged overloading. To restart the motor, turn off either switch and turn it back on.

  • Page 14: Maintenance

    900468 - 07-11-02.qxd 7/25/02 9:25 AM Page 14 CAUTION: Always be sure the work is rigidly clamped or otherwise secured before making a cut. Generally speaking, when working on a bench,use clamps to hold the workpiece. When routing edges, hold the router firmly down and against the work by both handles.

  • Page 15: Service And Repairs

    900468 - 07-11-02.qxd 7/25/02 9:25 AM Page 15 BRUSH INSPECTION AND LUBRICATION For your continued safety and electrical protection, brush inspection and replacement on this tool should ONLY be performed by an AUTHORIZED • DELTA FACTORY PORTER-CABLE SERVICE STATION or a PORTER-CABLE SERVICE CENTER.
  • Page 16 900468 - 07-11-02.qxd 7/25/02 9:25 AM Page 16 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.
  • Page 17 900468 - 07-11-02.qxd 7/25/02 9:25 AM Page 52 PORTER-CABLE • DELTA SERVICE CENTERS (CENTROS DE SERVICIO DE PORTER-CABLE • DELTA) (CENTRE DE SERVICE PORTER-CABLE • DELTA) Parts and Repair Service for Porter-Cable • Delta Power Tools are Available at These Locations (Obtenga Refaccion de Partes o Servicio para su Herramienta en los Siguientes Centros de Porter-Cable •...

Table of Contents