Porter-Cable 7403 Instruction Manual
  1. Manuals
  2. Brands
  3. Porter-Cable Manuals
  4. Power Tool
  5. 7403
  6. Instruction manual

Porter-Cable 7403 Instruction Manual

Double insulated paint remover
Hide thumbs Also See for 7403:
Table of Contents

Advertisement

Quick Links

Instruction
manual
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2005 Porter-Cable
ESPAÑOL: PÁGINA 19
FRANÇAIS : PAGE 35
Double Insulated
MODEL 7403
Please make certain that the person who is to use
this equipment carefully reads and understands
these instructions before starting operations.
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the spaces
below and retain for future reference.
®
Model No. ______________________________________
Type ___________________________________________
Serial No. ______________________________________
Part No. A14107 - 09-10-05 - Rev. A
Paint Remover
IMPORTANT!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7403 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Porter-Cable 7403

Summary of Contents for Porter-Cable 7403

  • Page 1: Instruction Manual

    Double Insulated Paint Remover MODEL 7403 IMPORTANT! Please make certain that the person who is to use To learn more about Porter-Cable this equipment carefully reads and understands visit our website at: these instructions before starting operations. http://www.porter-cable.com The Model and Serial No. plate is located on the main housing of the tool.

  • Page 2: Table Of Contents

    If you have any questions relative to its application DO NOT use the product until you have written Porter-Cable and we have advised you. Online contact form at www.porter-cable.com Postal Mail: Technical Service Manager...

  • Page 3: Safety Guidelines - Definitions

    SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 4: General Safety Rules

    GENERAL SAFETY RULES Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS Work area safety Keep work area clean and well lit.
  • Page 5 GENERAL SAFETY RULES continued Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

  • Page 6: Additional Specific Safety Rules

    ADDITIONAL SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Disconnect the cord plug from the power circuit before changing abrasive discs.
  • Page 7 SYMBOL DEFINITION V ........volts A ........amperes Hz ........hertz W ........watts kW ........kilowatts F ........farads µF ........microfarads l .......... litres g ........grams kg ........kilograms bar ........bars Pa ........pascals h ........hours min ........

  • Page 8: Additional Safety Rules For Paint Removal

    ADDITIONAL SAFETY RULES FOR PAINT REMOVAL Extreme care should be taken when removing paint. The peelings, residue, and vapors of paint may contain lead, which is poisonous. Exposure to even low levels of lead can cause irreversible brain and nervous system damage. Young and unborn children are particularly vulnerable.
  • Page 9 MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60 cycle A.C. current and voltage within plus or minus 5 percent of that shown on the specification plate on the tool. Several models, however, are designed for A.C.

  • Page 10: Carton Contents

    G. Right Handle Boss FUNCTIONAL DESCRIPTION FOREWORD Model 7403 has been designed for safe, quick, easy removal of paint from clapboard, porches, masonry steps, patios, walls, etc ASSEMBLY NOTE: This tool is shipped completely assembled. With the exception of the auxiliary handle, no assembly time or tools are required.
  • Page 11 The handle and collar may be tightened in any one of four positions (Fig. 3A through Fig. 3D). Move the handle and collar to the desired position and tighten securely. Fig. 3A Fig. 3B Fig. 3C Fig. 3D SPINDLE LOCK DISCONNECT TOOL FROM POWER SOURCE.
  • Page 12 Thread the aluminum and sponge rubber back-up pad (A) Fig. 7 on the machine spindle. Hand tighten. Select the Porter-Cable tungsten carbide disc with grit size best suited for the job. Center the disc on the back-up pad (Fig. 8) and thread the disc retaining nut on the spindle.

  • Page 13: Operation

    OPERATION HOW TO HOLD THE TOOL Hold the tool firmly with both hands (Fig. 9). Fig. 9 Fig. 10 TO START AND STOP THE TOOL To start the tool, depress the trigger (A) Fig. 10. To stop the tool, release the trigger.
  • Page 14 SIDE RAILS Two knobs (A) Fig. 12 are provided for controlling the movement of the side rails, above or below the pad. For manual instruction purposes, the right knob is on the same side of the motor frame as the sander handle. The right side rail is controlled by this knob.

  • Page 15: Troubleshooting

    #24 or #36 grit carbide disc for this job since the grit on paper discs is quickly destroyed. Masonry is sanded in the same manner as wood. TROUBLESHOOTING For assistance with your tool, visit our website at www.porter-cable.com for a list of service centers, or call the Porter-Cable Customer Care Center at (888)-848-...

  • Page 16: Maintenance

    FACTORY SERVICE CENTER. At approximately 100 hours of use, take or send your tool to your nearest authorized Porter-Cable Service Station to be thoroughly cleaned and inspected. Have worn parts replaced and lubricated with fresh lubricant. Have new brushes installed, and test the tool for performance.

  • Page 17: Service

    We cannot guarantee repairs made or attempted by others. You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson, Tennessee 38305 - Attention: Product Service. Be sure to include all of the information shown on the nameplate of your tool (model number, type, serial number, etc.).

  • Page 18: Warranty

    PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period.

  • Page 19: Español

    PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’s Saw ® , Contractor’s Saw ® , Contractor’s Saw II™, Delta ® , DELTACRAFT ® , DELTAGRAM™, Delta Series 2000™, DURATRONIC™, Emc²™, FLEX ®...

Table of Contents