Table of Contents
Advertisement
Software description
The Easy CD Creator/DirectCD software CD contains programs that work with
Windows 2000, Windows 98, Windows 95, and Windows NT 4.0. You can use the
programs with your CD-ReWritable drive to create audio and data CDs, to copy CDs,
and to make jewel-case inserts or CD labels. This manual provides basic instructions
on using the software to create CDs. For more information on using the software, go
to the online user's guide on the software CD.
Installation requirements
To install the CD-ReWritable drive, your computer must meet the following minimum
requirements:
ThinkPad A or T series computer with Ultrabay 2000 drive bay
32 MB of Memory
3.5-inch diskette drive
Windows 2000, Windows 98, Windows 95, or Windows NT 4.0 operating system
Locating the drive controls
The following diagram shows the location of the controls on the front of the drive.
1 Power light
This light is visible when drive is in use.
2 Eject button
Press this button to eject the CD when the drive is in use.
3 Manual eject hole
Use this emergency release to eject the CD when the Eject button does not work.
For more information on manually ejecting a CD, go to "Manually ejecting a CD"
on page 1-5.
1-2 IBM ThinkPad 4X/4X/20X CD-RW Ultrabay 2000 Drive
Advertisement
Table of Contents
