Cleanup For Oil-Based Materials (Suction Extension) - WAGNER WideShot Owner's Manual

Cleanup for oil-based materials (suction extension)

1. Make sure the sprayer is unplugged.
3. Plug in the sprayer, and squeeze the trigger and spray
into a second container until the solvent coming through
the sprayer is free of material. Unplug the sprayer.
5. Remove the suction set from the cleaning solution.
Unlock dual hose fitting (with hoses still attached) from
pump assembly ring.
Title
2. Remove the suction set from the material container and
submerge into a container of the solvent appropriate to
the type of material you sprayed.
4. Unplug the sprayer. Press the Lock-N-Go™ buttons on
both sides of the sprayer with one hand, grab the cup or
pump with your other hand, and slide the spray cartridge
out.
6. Remove the suction set and dual hose fitting from the
suction hoses.
Move on to Cleaning the
15
Components, page 16.
English