JL Audio NexD M800/8v2 Owner's Manual
  1. Manuals
  2. Brands
  3. JL Audio Manuals
  4. Amplifier
  5. NexD M800/8v2
  6. Owner's manual

JL Audio NexD M800/8v2 Owner's Manual

800w marine 8 channel amplifier
Hide thumbs
Table of Contents

Advertisement

Quick Links

owner's manual
800W Marine 8 Channel Amplifier
Marine 8 Channel Amplifier
INPUT MODES:
2 Ch. Input 1 feeds CH. 1, CH. 3, CH. 5 & CH. 7
Input 2 feeds CH. 2, CH. 4, CH. 6 & CH. 8
4 Ch. Input 1 feeds CH. 1 & CH. 3
Input 2 feeds CH. 2 & CH. 4
Input 5 feeds CH. 5 & CH. 7
Input 6 feeds CH. 6 & CH. 8
8 Ch. Each input feeds its
corresponding output channel
+12 VDC
Ground
Remote
Thank you for purchasing a JL Audio amplifier for
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vessel.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier's operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
Remote
Turn-On
CH. 1 & 2
CH. 3 & 4
Level
Input
Mode
Mode
Sens.
Rem. | O set | Signal
All | 5- 8 | 7&8
Input Voltage
Input Mode
Filter Mode
Filter Mode
Low | High
2 Ch. | 4 Ch. | 8 Ch.
O | HP | LP
O | HP | LP
Filter Freq. (Hz)
(L)
CH. 1
CH. 3
CH. 5
CH. 7
CH. 2
CH. 4
CH. 6
CH. 8
(R)
CH. 1
CH. 2
(L)
(R)
your marine sound system.
CH. 5 & 6
CH. 7 & 8
Input
Input
Input
Sens.
Sens.
Sens.
Filter Mode
Filter Mode
O | HP | LP
O | HP | LP
Filter Freq. (Hz)
Filter Freq. (Hz)
Filter Freq. (Hz)
CH. 3
CH. 4
CH. 5
CH. 6
CH. 7
CH. 8
(L)
(R)
(L)
(R)
(L)
(R)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NexD M800/8v2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for JL Audio NexD M800/8v2

Summary of Contents for JL Audio NexD M800/8v2

  • Page 1 For maximum performance, we highly recommend that you have your new amplifier installed by an authorized JL Audio dealer. Your authorized dealer has the training, expertise and installation equipment to ensure optimum performance from this product.

  • Page 2: Protect Your Hearing

    This is an extremely dangerous high-power amplifiers are capable of producing The outer shell of your JL Audio amplifier is which does not interfere with your vessel’s factory practice which can result in severe damage to...

  • Page 3: Product Description

    16) Enjoy the fruits of your labor with your ECS fused distribution blocks are recommended only the M800/8v2 is being run from that power 4) Connect negative power wire to the negative (XD-FDBU-2 and XD-FDBU-4) wire, we recommend a 80A fuse be used.

  • Page 4: Turn-On Options

    “Remote” input and turn off when +12 V is prevents false switching from signals created by Input 6 feeds CH. 6 & CH. 8 the M800/8v2, simply use all eight inputs and set window. If you are using a source unit with CH. 2 CH.

  • Page 5: Input Sensitivity Controls

    Active filters are more one or more of the M800/8v2’s channel pairs in a rear channel level control, zone control, or even O | HP | LP...

  • Page 6: Speaker Outputs

    Information: If you wish to send a left-only light will return to green and the amplifier will per channel (or 4 ohms bridged) are or right-only signal to a pair of the M800/8v2’s return to full-power operating mode. not recommended and may cause the channels, use a “Y-Adaptor”...
  • Page 7 If your amplifier fails or malfunctions, please return it to your authorized JL Audio dealer so that it may be sent in to JL Audio for service. There are no user serviceable parts or fuses inside the amplifier. The unique nature of the circuitry in the JL Audio amplifiers requires specifically trained service personnel.
  • Page 8 31 ......192 range to be amplified by the M800/8v2) at 3/4 Crossover Filters: 32 .
  • Page 9 Please refer to Appendix A (page 14) to set the input sensitivity for Check your voltage source and grounding point. The power supply maximum, low-distortion output. of the M800/8v2 will operate with charging system voltages “my amplifier doesn’t turn on.” down to 10V. Shutdown problems at higher volume levels Check the fuse, not just visually, but with a continuity meter.

  • Page 10: Installation Notes

    CH. 6 CH. 8 8 Ch. Each input feeds its corresponding output channel CH. 1 CH. 2 CH. 3 CH. 4 CH. 5 CH. 6 CH. 7 CH. 8 +12 VDC Ground Remote 18 | JL Audio - XD800/8v2 Owner’s Manual...
  • Page 11 All warranty returns should be sent to JL AUDIO ’s Amplifier Service Facility freight-prepaid through an authorized JL AUDIO dealer and must be accompanied by proof of purchase (a copy of the original sales receipt). Direct returns from consumers or non-authorized dealers will be refused unless specifically authorized by JL AUDIO with a valid return authorization number.

Table of Contents