Table of Contents
Advertisement
Maple Top Assembly
Caution:
Consider the weight of the components and take the necessary precautions when lifting.
Assistance may be required during assembly.
Step 1)
Place the Maple Top (13) upside down on a clean, flat surface. Use a mat or cloth to prevent
scratching the Maple Top (13).
Step 2)
Lay the assembled portion of the Metal Work Station upside down over the Maple Top (13).
Make certain that the Side Panels (9) are square with the Top and Bottom Rail (11).
Step 3)
Center the Maple Top (13) or align the Maple Top with the assembly as desired. Mark the hole
locations on the Maple Top (13) through the holes in the Top Rails (11). Move the assembled
section aside and drill four (4) 5/32" diameter x 1/2" deep holes in the Maple Top (13).
Warning:
Do not drill deeper than 1/2".
Step 4)
Set the assembled portion of the Metal Work Station back in place on the Maple Top (13).
Where the Top Rail (11) holes line up with the holes you drilled in the Maple Top (13), insert the
four (4) 5/8" Hex Screws (18) to secure the Maple Top (13) to the rest of the assembly.
Step 5)
Securely tighten all hardware.
Step 6)
Attach the Adjustable Legs (15). Place the Metal Work Station into an upright position.
Complete adjustment of the Adjustable Legs (15).
Step 7)
Slide in all drawers.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED
TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY
PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LI-
CENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 42606
For technical questions, please call 1-800-444-3353.
PLEASE READ THE FOLLOWING CAREFULLY
Page 9
Advertisement
Table of Contents
