For Your Safety; Safety Warnings - Beta 1850B Instructions For Use Manual

For your safety

These hot air guns are doubly protected from overheating:
1. A temperature sensor switches off the heating element in the event of improper tool use;
the blower continues to run.
2. The thermal cut-out completely shuts down the tool if it is overloaded.

Safety warnings

!
Read and observe this informa-
tion before using the tool.
Failure to observe the oper-
ating instructions may result in
the tool becoming a source of
danger.
When using electric power tools,
observe the following basic safety
precautions to avoid electric shock
and the risk of injury and fire. Fire
may be caused if the tool is not
used with care.
Take ambient conditions
into account.
Do not expose electric power
tools to rain.
Do not use electric power tools
when they are damp or in a damp
or wet environment.
Exercise care when using the tool
in the proximity of flammable
materials. Do not direct hot air
onto the same spot for any pro-
longed period.
Do not use in the presence of an
explosive atmosphere.
Heat may be conducted to flam-
mable materials that are out of
sight.
Protect yourself from
electric shock.
Avoid touching earthed objects,
such as pipes, radiators, cookers
or refrigerators. Do not leave the
tool unattended while in operation.
Store your tools is
a safe place.
Place tool on stand after use and
allow to cool before putting it away.
Tools that are not in use should be
stored in a dry, locked room and
out of the reach of children.
Do not overload your
tools.
Work results and safety will be
enhanced if you stay within the
specified output range.
After using the tool for a prolonged
period at maximum temperature,
you should reduce the tempera-
ture before switching the tool off.
This will prolong the life of the
heating element.
Do not carry the tool by the power
cord. Do not unplug the tool by
pulling on the power cord. Protect
the power cord from heat, oil and
sharp edges.
- 7 -
Beware of toxic gases
and fire hazards.
Toxic gases may occur when
working on plastics, paints,
varnishes or similar materials.
Beware of fire and ignition
hazards.
For your own safety, use only
accessories and attachments that
are specified in the operating
instructions or recommended or
specified by the tool manufacturer.
Using attachments or accessories
other than those recommended
in the operating instructions or
catalogue may result in personal
injury.
Repairs must only be
carried out by a
qualified electrician.
This electric power tool complies
with the relevant safety regulations.
Repairs must only be performed
by a qualified electrician, other-
wise the user may run the risk of
accidents.
Keep these safety warnings in a
safe place.
GB