Related Manuals for Beta 1550U
Summary of Contents for Beta 1550U
- Page 1 1550U ISTRUZIONI PER L’USO INSTRUCTIONS FOR USE MODE D’EMPLOI GEBRAUCHSANWEISUNG INSTRUCCIONES INSTRUÇÕES DE USO GEBRUIKSAANWIJZING INSTRUKCJA OBSŁUGI HASZNÁLATI ÚTMUTATÓ...
- Page 2 INSTRUCTIONS FOR USE ISTRUZIONI PER L’USO PNEUMATIC SHOCK ABSORBER REMOVAL TOOL ITEM BETA 1550U OPERATION MANUAL AND INSTRUCTIONS FOR SHOCK ABSORBER REMOVAL TOOL MANUFACTURED BY: BETA UTENSILI S.P.A. Via A. Volta 18, 20845, Sovico (MB) ITALY Original documentation drawn up in ITALIAN.
- Page 3 INSTRUCTIONS FOR USE ISTRUZIONI PER L’USO • Check the connections and the air supply lines. All units, couplers and hoses should conform to the product specifications in terms of pressure and air volume. Too low pressure impairs the function of the machine;...
- Page 4 INSTRUCTIONS FOR USE ISTRUZIONI PER L’USO PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING SHOCK ABSORBER REMOVAL TOOL Failure to observe the following warnings may result in physical injury and/or disease. ALWAYS WEAR SAFETY SHOES ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS ALWAYS WEAR EYE PROTECTION WHILE OPERATING SHOCK ABSORBER REMOVAL TOOL OR PERFORMING MAINTENANCE JOBS TECHNICAL DATA...
- Page 5 Never use oil, detergents or releasers on the sliding parts (columns). The pneumatic tool must be connected to a filter-lubricator unit (we recommend Beta item 1919F1/4) provided with an air-oil microfog mixer, set at two drops per minute. This will result in a high-performing tool and wear-resistant mechanical parts.
-
Page 6: Declaration Of Conformity
Machine Directive 2006/42/EC and amendments thereto, as well as with the following standard: • EN ISO 12100 • EN ISO 4414 The Technical Brochure is available at: BETA UTENSILI S.P.A. Via A. Volta 18, 20845 Sovico (MB) ITALY Date 01/07/2016...
Need help?
Do you have a question about the 1550U and is the answer not in the manual?
Questions and answers