Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
EO is displayed on
LED Screen
E1 is displayed on
LED Screen
E2 is displayed on
LED Screen
E3 is displayed on
LED Screen
The appliance automatically
switches to Keep Warm
without going through a
complete cooking cycle.
Air is escaping from the rim
of the lid
Steam is released from the
float valve
The float can not rise in
PRESSURE COOK setting
EASy SOLUTION
a.
Check that lid is closed properly
b.
Check the pressure release valve is in the
correct position
c.
Make sure the silicone rubber gasket is attached
properly to the gasket holder and is securely in place
on the lid
•
Unplug unit and allow to sit for 20 minutes. If no
change, Please call Breville Customer Service.
•
Ensure Cooking bowl is properly positioned inside
base. The cooking bowl must be in direct contact
with the heating plate. Make sure there are no
unwanted materials on the heating plate.
•
Ensure lid is off the appliance or placed on top to
rest in an offset position when you are using the
SAUTÉ/SEAR setting.
•
Add more water to cooking bowl and restart the
cooking cycle.
a.
Install sealing gasket correctly
b.
Clean sealing gasket
c.
Replace sealing gasket
d.
Lock lid again
a.
Clean sealing gasket
b.
Replace sealing gasket
c.
Change silicone rubber gasket every 1-2 years.
a.
Place Pressure release valve in the correct position
b.
Place more food and water in the cooking bowl
c.
Call Breville Customer Service
43
Hide quick links:
Advertisement
Table of Contents
