Viper 4103XV Installation Manual page 33

able options in each feature.
You can advance from feature to feature by pressing and releasing the
Program switch the number of times necessary to get from the feature
you just programmed to the feature you wish to access.
For example, in Menu One, if you just programmed feature 1-3 to
off, and you want to program the next feature 1- 4, release the Pro-
gram switch. Press and release it once to advance from Feature 1-3
to Feature 1- 4. Then press it once more and
in groups of 4 and the horn honks 4 times to confirm that you have
accessed Feature 1- 4.
The learn routine will be exited if any of the following occurs:
• The ignition is turned on.
• The Program switch is pressed too many times.
• More than 25 seconds elapses between programming steps.
© 2009 Directed Electronics. All rights reserved.
Transmit.
4.
desired setting. Pressing
ing on the remote will cycle through the avail-
Release.
5.
�������
leased.
The remote control is used to select the
The Program switch can now be re-
�������
HOLD
turns on the LED. Press-
it. The LED flashes
33