Filling Water - Honeywell CL25AE Owner's Manual

USE & OPERATION

FILLING WATER

The water tank of the unit holds up to 25 litres of water.
Water needs to be filled inside the unit with the help of water fill door located on the left side
panel of the unit. You may use a water filled jug to manually fill water inside the tank or can also
connect a water pipe to fill this tank.
Water level display window is located on the front of the unit. Refill the water tank when water
level is low. Do not fill water above the Max water level mark. Check water level in the tank
before running the ''COOL'' function. Please be sure water inthe tank is always above minimum
water level mark. Running the unit with inadequate water may cause pump failure. If ice is
available you may add ice in the top compartment to enhance the cooling performance.
CAUTION
Unplug from power when refilling.
13