More About This Unit; Tuner Operations - JVC KD-HDW10 Instructions Manual

You can connect an external component to
the CD changer jack on the rear using the Line
Input Adapter-KS-U57 (not supplied) or AUX
Input Adapter-KS-U58 (not supplied).
• For connection, see Installation/Connection
Manual (separate volume).
For listening to the satellite radio, iPod, or
D. player, refer to pages 19 - 23.
o
AI./i?iUt~i ~
EXT IN (orCD-CH)-'--i
';~ ~-------------------------,
If "EXT IN" does not appear, see page 18
and select the external input ("EXT IN").
• Turn on the connected component
and start playing the source.
•
8
Adjust the sound as you want. (See
pages 14 - 16.)
To check the clock time while listening to an
external component
JOlsA:~~
. . ( Clock - EXT IN )
More about this unit
Basic operations _
Turning on the power
• By pressing SRC on the unit, you can also turn
on the power. If the source is ready, playback
also starts.
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Tuner operations
I I · _
Storing stations in memory
• During SSM search...
- All stations including HD Radio stations are
searched and stored for the selected band.
- All previously stored stations are erased and
stations are stored newly.
- Received stations are preset in No.1 (lowest
frequency) to No.6 (highest frequency).
- When SSM is over, the station stored in
No.1 will be automatically tuned in.
• When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
Disc operations
I I , _
Caution for DualDisc playback
• The Non-DVD side of a "DualDisc" does
not comply with the "Compact Disc Digital
Audio" standard. Therefore, the use of Non-
DVD side of a "DualDisc" on this product
may not be recommended.
General
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/
CD-RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA formats.
• When a disc has been loaded, selecting "DISC"
for the playback source starts disc play.