AMT Configuration
Configuration Active Management Technology parameters.
–
Intel AMT: Enable/Disable Intel(R) Active Management Technology BIOS
Extension.
–
Note: iAMT H/W is always enabled. This option just controls the BIOS exten-
sion. If enabled, this requires additional firmware in the SPI device.
–
BIOS Hotkey Pressed: OEMFLag Bit 1: Enable/Disable BIOS hotkey press.
–
MEBx Selection Screen: OEMFLag Bit 2: Enable/Disable MEBx selection
screen.
–
Hide Un-Configure ME Confirmation: OEMFLag Bit 6: Hide Un-Configure ME
without password Confirmation Prompt.
–
MEBx Debug Message Output: OEMFLag Bit 14: Enable MEBx debug mes-
sage Output.
–
Un-Configure ME: OEMFLag Bit 15: Un-Configure ME without password.
–
Amt Wait Timer: Set timer to wait before sending
ASF_GET_BOOT_OPTIONS.
–
ASF: Enable/Disable Alert Specification Format
–
Activate Remote Assistance Process: Trigger CIRA boot.
–
USB Configure: Enable/Disable USB Configure function.
–
PET Progress: User can Enable/Disable PET Events progress to receive
PET events or not.
–
WatchDog: Enable/Disable WatchDog Timer.
ARK-DS762 User Manual
Figure 3.7 AMT Configuration setup screen
20